Prepares a FRU (for example, a power supply) for removal, and illuminates the host system's OK-to-Remove indicator light.Īllows the user to store up to 80 characters of user-defined text in the FRU SEEPROM.ĭisplays information about the field-replaceable units (FRUs) in a host server.ĭisplays a list of all ALOM commands with their syntax and a brief description of how each command works.ĭisplays the ALOM set date. This function is available only on host servers that have Locator LEDs.ĭisplays the current network configuration information. This information includes system temperatures, power supply status, front panel LED status, hard disk drive status, fan status, voltage and current sensor status, and rotary switch position.ĭisplays the current state of the Locator LED as either on or off. This function is available only on host servers that have Locator LEDs.ĭisplays the environmental status of the host server. Turns the Locator LED on the server on or off. Turns the alarm and associated LED on and off. Generates a hardware reset on the host server. Removes the main power from the host server.Īpplies the main power to the host server or FRU. This command downloads main and bootmon firmware images to ALOM. Generates Secure Shell (SSH) host keys and displays the host key fingerprint on the SC.ĭisplays the host server console output buffers.ĭisplays the history of all events logged in the ALOM event buffer.Ĭontrols the host server OpenBoot PROM firmware method of booting.ĭrops the host server from running the Solaris Operating System into OpenBoot PROM or kadb. If you have a Sun Fire V215, V245, V445 server, the output also includes the Chassis Serial Number. This script configures the ALOM configuration variables.ĭisplays the current NVRAM configuration parameters.ĭisplays information about the host system's hardware configuration, and whether the hardware is providing service. Runs the interactive configuration script. Sets the specified ALOM parameter to the assigned value.
Before powering off the host server, ALOM asks for a confirmation. Setting the virtual keyswitch to standby ( stby) powers off the server. Sets the status of the virtual keyswitch. Resets all ALOM configuration parameters to their default values. Sets the date and time, when the managed operating system is not running. Restores an ALOM configuration from a remote file server using FTP. Restarts the SSH server so that new host keys generated by the ssh-keygen command are reloaded. Saves the current ALOM configuration to a remote file server using File Transfer Protocol (FTP).Ĭhanges the login password of the current user. TABLE 5-1 List of ALOM Shell Commands by Function TABLE 5-1 lists the ALOM shell commands in alphabetical order within function, briefly describes what these commands do, and shows where to get more information.
0 kommentar(er)
